Epson LX-HOO Technical Manual page 90

ASSEMBLING POINTS:
1. When reassembling the paper guide plate and the paper guide spacer, refer to Figure 4-15 for the
mounting direction.
I . \ \
F o r w a r d + -
side containing
the cutout is the
right side.
(Viewed from front of Printer Mechanism)
Fig. 4-15. Paper Guide Plate and Spacer Assembly Points
2. When installing the paper release lever and the paper guide plate release lever, carefully observe
the mounting positions shown in Figure 4-16.
Paper Release Lever
Guide Plate Release
Paper Lever
Paper Guide Plate Release Shaft
B
(Viewed from left side of Printer Mechanism)
Fig, 4-16. Paper Release Lever and Paper Guide Plate Release Lever Assembling Point
. The paper release lever and the paper guide plate release lever must be joined at point A, and the
paper guide plate release shaft and a section of the paper guide plate release shaft must be joined
at point B, as shown in the figure above.
4-11