Washer Locks Up Or Binding - Maytag NAV2330 Service Manual

Troubleshooting Procedures
To avoid risk of electrical shock, personal injury, or death, disconnect power to washer before servicing, unless
testing requires it.
Washer locks-up or binding
• Excessive drive belt tension. Replace drive belt
and/or idler spring.
• Bind in upper or lower bearing. Replace bearing.
• Broken, loose, shorted or incorrect wiring.
18
!
W ARNING
• Bind in water pump.
• Bind in transmission.
• Brake pads are binding.
• Incorrect voltage.
16022937 Rev. 0
©2005 Maytag Services