Removing The Wireless Lan Module - Clevo W760SUA Service Manual

Disassembly

Removing the Wireless LAN Module

Figure 10
Wireless LAN
1. Turn off the computer, remove the battery
Module Removal
2. The Wireless LAN module will be visible at point
3. Carefully disconnect cables
a. Remove the cover.
4. The Wireless LAN module
b. Disconnect the cable
5. Lift the Wireless LAN module
and remove the screw.
c. The WLAN module will
a.
pop up.
d. Lift the WLAN module
out.
Note: Make sure you
reconnect the antenna
cable to ''1'' +
''2''socket (Figure
b).
c.

5. WLAN Module.
• 1 Screw
2 - 14 Removing the Wireless LAN Module
- , then remove screw
2
3
will pop-up.
5
(Figure 10d) up and off the computer.
1
5
(page 2 - 5) and the component bay cover
on the mainboard.
1
from the module socket.
4
b.
d.
5
(page 2 - 9) .
2
3
4