Removing And Installing The Processor - Clevo W760SUA Service Manual

Removing and Installing the Processor

Processor Removal Procedure
1. Turn off the computer, remove the battery
2. The CPU heat sink will be visible at point
3. Loosen the CPU heat sink screws in the order
4. Carefully lift up the heat sink
a.
A
b.
3
2
1
4
(page 2 - 5) and the component bay cover
on the mainboard.
A
, &
,
4 3 2 1
(Figure 7c) off the computer.
B
c.
(page 2 - 9).
(the reverse order as indicated on the label).
B
Removing and Installing the Processor 2 - 11
Disassembly
Figure 7
Processor Removal
a. Remove the cover and
Iocate the heat sink.
b. Remove the screws in
the order indicated.
c. Remove the heat sink.

B. Heat Sink
• 4 Screws