Table of Contents
Advertisement
AUTO-ADJUST
Auto Adjustment is in progress, the following message appears on the screen,
"Auto Adjustment in Progress...".
SET UP
It includes V. Keystone, Auto Keystone, Projector Mode, Aspect Ratio and
Projector Info settings.
V. K
EYSTONE
A
K
UTO
EYSTONE
P
ROJECTOR
the projector is mounted.
•
•
down for ceiling-mounted projection.
•
project from behind a translucent screen.
•
image upside down. You can project from behind a translucent screen with a
ceiling-mounted projection.
A
R
SPECT
•
ratio of the input source.
•
4:3 — The input source scales to fit the height of the screen.
•
Use Wide or 4:3 if you are using one of the following:
– Computer resolution greater than WXGA
Downloaded From projector-manual.com DELL Manuals
—Adjusts the image distortion caused by tilting the projector.
—Auto adjusts the image distortion by tilting the projector.
M
—Allows you to select the projector mode, depending upon how
ODE
Front Projection-Desktop — This is the default option.
Front Projection-Ceiling Mount — The projector turns the image upside
Rear Projection-Desktop — The projector reverses the image so that you can
Rear Projection-Ceiling Mount — The projector reverses and turns the
—Allows you to set the aspect ratio.
ATIO
Original — The input source scales to fit the screen while keeping the aspect
Wide — The input source scales to fit the screen.
Auto Adjust automatically adjusts the
projector's FREQUENCY and
TRACKING in PC mode. While
Using Your Projector
27
Advertisement
Table of Contents
