External Ir Connection - Russound MDK-C5 User And Installation Manual

ExTERNAL IR CONNECTION

External IR Connection to MDK-C5 Keypad
The MDK-C5 keypad has an External IR Receiver In terminal
for connecting an external IR Receiver such as the Russound
858, SaphIR 862 Eye, or SaphIR 860 Phantom.
Use 2 twisted pair wire with one pair connecting GND
(GROUND) and IR (SIGNAL) and the other pair connecting ST
(STATUS) and V+ (+12VDC). Do not connect the shield to the
IR receiver terminals.
If utilizing an external IR receiver, then you must disable
the IR receiver in the keypad. This is disabled in the installer
options menu on the keypad. See screen at right.
Russound 858
IR Receiver (back)
10
Do NOT
Connect
Shield
2 Twisted
Pair Cable
Connection of External IR to Keypad
Russound MDK-C5 User and Installation Manual
AM/FM Front IR
Off
On
Disable Keypad IR
Shield wired to GND
on keypad only
11:30 AM