Ir Receiver Connection - Russound UNO-S2 Installation Manual

INSTALLER GUIDE

IR Receiver Connection

Back of
Russound 858
DO NOT
CONNECT
SHIELD
20
Back of
UNO-S2
The UNO-S2 keypad has an EXTERNAL
IR RECEIVER IN terminal for connecting
an external IR Receiver such as the
Russound 858, SaphIR 862 Eye, or
SaphIR 860 Phantom. Use 2 twisted
pair wire with one pair connecting GND
(GROUND) and IR (SIGNAL) and the
other pair connecting ST (STATUS) and
V+ (+12VDC). Connect the shield or
drain to ground at the UNO-S2 only.