Pictbridge Camera Not Detected - Kodak ESP 7 User Manual

Multiple-page document not printing in reverse order (Windows only)
To set a Windows PC to print in reverse order:
Multiple-page document not printing in first-page first order (Macintosh only)
To set a Macintosh to print the first page of a document first:

PictBridge camera not detected

NOTE: On a Macintosh, Reverse Page Order printing is the default setting. See
set a Macintosh to print the first page of a document first:
Probable Cause
The print settings on your computer are set to print the first page of your document
first.
Corrective Action
Configure the printer to print the document in reverse order, so the pages are in the
correct order when printing is complete.
1. On the Windows Desktop, click Start > Settings > Control Panel .
2. In the Control Panel window, open Printers or Printers and Faxes.
3. In the Windows Explorer window, right-click on the Kodak All-in-One printer in
the Name column, and then select Printing Preferences .
4. On the Printing Preferences window, select Print last page first on the General
tab.
Probable Cause
The print settings on your computer are set to print the document in reverse order.
Corrective Action
Configure the printer to print the document first-page first.
1. On the File menu, select Print .
2. On the Print dialog, select Paper Handling .
3. Select the Normal Page Order option.
Probable Cause
The camera is not communicating with the printer.
Corrective Action
• Make sure the camera is turned on.
• Check the USB connections from the PictBridge camera to the printer.
• If disconnected, reconnect the USB cable from the PictBridge camera to the
printer.
www.kodak.com/go/aiosupport
KODAK ESP 7 All-in-One Printer
below.
To
75