Lcd Screen - Kodak ESP 7 User Manual

Number
1 On/Off button
2 Menu button
3 Screen
4
Attention light
5 Cancel button
6
Wireless network status light
7 Ethernet network status light
8 Zoom buttons
9 4-way navigation buttons
10 OK button
11 Start button

LCD screen

Name
NOTE: See Adjusting the control panel position, page 8
and lowering the control panel so that it is easier to use.
The LCD screen displays photos, messages, instructions, and menu items. Menu
navigation is accomplished with the 4-way Navigation buttons on the control panel.
The LCD Start-Up screen displays when the printer is ready for operation but is not
performing a task. The screen also displays the current level of black and color ink.
www.kodak.com/go/aiosupport
Description
Powers the printer ON or OFF.
Displays the menu, and toggles between parameters
screens and preview screens.
Displays photos, messages, status, and menus.
Blinks or flashes when an error occurs.
Cancels the current operation and control panel
navigation, and returns you to the menu.
When lit, signals that a wireless (Wi-Fi) network
connection is active. If the LED is illuminated, you may
not be connected to the network yet. Go to Network
Settings, View Network Configuration, and verify that
it says it is Network and Connected.
Blinks when searching for an available Wi-Fi network
within range, or when the existing signal is too weak to
transmit or receive wireless signals.
When lit, signals that an Ethernet network connection
is active.
Let you zoom in and out of a photo.
Enable you to navigate menus and photos, and pan
around a zoomed photo.
Enables you to complete a menu selection or photo
print command, or allows you to continue with the
current operation.
Starts the following operations: copy, scan, print, and
transfer.
Color ink level monitor
Black ink level monitor
KODAK ESP 7 All-in-One Printer
for instructions on raising
7