Kodak ESP 7 User Manual page 23

Light Status
Off
Blinks (slow)
The LCD screen describes the error.
Blinks (slow)
On
Light Status
Off Either the memory card is not inserted or is
improperly inserted in the card slot.
Blinks The internal card reader is initializing or
communicating with a memory card.
On A memory card is properly inserted in the
card slot.
Attention Light
None.
Paper jam.
Paper tray empty.
Paper carriage stall.
Paper size or type mismatch.
Change ink cartridge.
Ink cartridge not readable.
Printhead not calibrated.
Unit open, scanner lid open, rear access door open.
Too many image sources.
Printhead not installed.
Unable to read memory card or USB host device.
Ink cartridge(s) inserted incorrectly.
Ink cartridge(s) not installed.
Media sensor failure.
Printhead failure.
Scanner failure.
Memory Card Slot Light
Cause
www.kodak.com/go/aiosupport
KODAK ESP 7 All-in-One Printer
Error
Action/Solution
Remove and reinsert the memory card.
None.
None.
15