Controlling The Processor Drive; Turning The Drive On; Returning The Drive To Normal Operation; Computer Reset - Kodak PROFESSIONAL LED II 20P Operator's Manual

September 2000

Controlling the Processor Drive

Turning the Drive On

1. Press Drive.
2. Press Set.
3. Press Drive.
The drive is on.

Returning the Drive to Normal Operation

1. Press Drive.
2. Press Set.
3. Press Drive twice.
The speed value is displayed.

Computer Reset

Resetting the Processor

NOTE: Before resetting the processor, make sure you record the current settings.
You may need to reenter them.
1. Press both Reset keys simultaneously.
2. Press any blue function key to clear the machine reset message.

Loading the Defaults and Changing the Configuration

This procedure allows you to:
•
change the settings for the processor to metric values
•
change the tolerance specifications for temperature and development time
•
return all setting to their default values
IMPORTANT: Before loading defaults and change the processor configuration:
• Record all processor settings and calibrations.
• Turn the key switch to the service position.
Press and hold Set and both Reset keys. Release the Reset keys and then
release the Set key.
NOTE: The light above the left Reset key illuminates when both keys are pressed.
To save any changes and return to normal operation, reset the processor by
pressing both Reset keys simultaneously. Do not press Set.
System Operating Procedures
3-39