PRESETS
The SMMH can save one preset for each of the 8 HAZARAI modes. Each saved preset will
pertain directly to the mode you have saved it in. For example, if a preset is saved with
exactly 7 repeats at a delay time of 300mS in the MULTI TAP-3 SEC mode, when you recall
that preset it will sound exactly as it did when you saved it: 7 repeats at a delay time of
300mS. Once a preset is saved, the SMMH will remember the preset after power has been
disconnected. When saving a preset to LOOP mode, it will save all of the knob settings but
it will not save the loop. In addition, when loading a preset in LOOP mode, upon recording
a new loop the DELAY and DECAY knobs will always change to their default settings even if
you recalled a loop preset prior to recording the loop. Once the loop has been recorded, if
you then recall the LOOP preset, it will restore both the DELAY and DECAY knobs to their
stored values.
Saving a preset will save the setting of all 5 of the black knobs. It will also save a tapped in
delay time if that is the current delay time at the moment of saving the preset.
PRESET SAVE PROCEDURE:
1.
To Save the sound you are currently hearing, press and hold down the HAZARAI
knob.
2.
You will need to hold down the HAZARAI for 3 seconds. Nothing will occur for 2
seconds, then all of the mode LEDs will blink for 1 second.
3.
After the LEDs stop blinking, let go of the HAZARAI knob. The Preset LED will
light up solid.
4.
Your preset has been saved in the mode that is currently lit.
PRESET LOAD PROCEDURE:
1.
To Load a preset you previously saved: turn the HAZARAI knob to the mode
where the preset was saved.
2.
Press and release the HAZARAI knob. The PRESET LED will light up to indicate
that the Preset has loaded. Please Note: The current knob positions are no
longer valid.
After loading a preset, if you move a knob, the knob's new location will supersede the
preset's stored value for that knob. At this point, the PRESET LED will blink rapidly to
indicate that a knob has been moved.
After loading a preset, turning the HAZARAI knob to another mode will cancel the last
preset that was loaded and restore all of the current knob positions.
13
- CONTROLS, INDICATORS & I/O-
The following descriptions detail all of the knobs, switches, LEDs (lights) and I/O jacks on
the SMMH:
HAZARAI KNOB
This is the white knob located in the upper right corner of your SMMH. The HAZARAI knob
is a rotary encoder enabling the user to scroll through the 8 Modes of the SMMH. Turn the
knob clockwise to progress up through the modes: from LOOP to ECHO-3 SEC mode. Turn
the knob counter-clockwise to progress down through the modes: from ECHO-3 SEC to
LOOP mode.
Please Note: when you are in LOOP mode the LOOP LED will only light if you have a loop
in memory. If no modes are lit, that means you are in LOOP mode.
The HAZARAI knob also has a push switch to save and load presets. To load a preset, turn
the HAZARAI knob to select the desired mode and then give the HAZARAI knob a quick
tap. Push it down then release it. To save a preset, push down and hold the HAZARAI knob
for 3 seconds. You will then see all of the mode LEDs blink rapidly. Continue to hold down
the HAZARAI knob until the LEDs stop blinking. At this point the preset is saved and you
can let go of the knob. Only one preset is saved per mode and the preset you save is
based on the current mode.
DELAY KNOB
In all modes except LOOP mode the DELAY knob sets the Delay time for the echo. The
total range of the DELAY knob varies depending on the selected mode. The following table
displays the DELAY knob time range for each echo mode:
MODE
ECHO-3 SEC
ECHO-1 SEC
ECHO-300mS + MOD
MULTI TAP-3 SEC
MULTI TAP-1 SEC
MULTI TAP-1 SEC + REV
DÉJÀ VU-REVERSE ECHO
Please Note: the delay time can also be set by the TAP/RECORD footswitch. The control
that takes precedence is the one that is last touched. If you tap in a delay time, then turn
TIME RANGE
1.8mS to 3150mS
0.6mS to 1050mS
0.2mS to 350mS
1.8mS to 3150mS
0.6mS to 1050mS
0.6mS to 1050mS
0.2mS to 3150mS
14
Need help?
Do you have a question about the STEREO MEMORY MAN WITH HAZARAI and is the answer not in the manual?
Questions and answers