Electro-Harmonix STEREO MEMORY MAN WITH HAZARAI User Manual page 10

MONO/L and R INPUT Jacks
The SMMH allows for full stereo input. The input jacks are labeled: Mono / L and R. When
using the SMMH with only one input we suggest you use the MONO/L input. The input
impedance presented at each input jack is 2 MΩ.
MONO/L and R OUTPUT Jacks
The SMMH has true stereo output. The output jacks are labeled: MONO/L and R. If using
the SMMH as a mono effect we suggest you use the MONO/L input and output. The SMMH
can also be used with Mono in and Stereo out. Plug your input into the MONO/L jack and
then connect the MONO/L and R Outputs to two separate amps or inputs on a mixing
board.
When you connect the SMMH in a Mono to Stereo configuration, the delays will bounce or
ping-pong between the two outputs. The first repeat will go out the MONO/L Output, the
second repeat will go out the R Output, the third repeat out the MONO/L Output and so
on. When you connect a plug to the R Input, the SMMH will stop the ping-pong effect:
whatever goes into the Right Input will go out the Right Output, whatever goes in the Left
Input will go out the Left Output.
9V Power Jack
Plug the output of the SMMH's supplied AC Adapter into the 9V power jack located at the
top of the SMMH. The SMMH requires 9 - 9.6VDC at 200mA with a center negative plug.
The SMMH accepts Boss style AC Adapters.
Technical Specifications
Sample Rate = 46.88 kHz
A/D and D/A Conversion Bit Resolution = 24 bits
Delay Audio Bit Resolution = 32 bits
Looper Audio Bit Resolution = 32 Bits
19 20