Table of Contents
Advertisement
Appendix A, Page A-2
7. Caution: When installing Ventilators incorporating a UV system, ELXC-UVi Series, do not cover
7. Caution: When installing Ventilators incorporating a UV system, ELXC-UVi Series, do not cover the UV
the UV Ballast Box, mounted on top of the Ventilator, with building insulation. Covering the
Ballast Box, mounted on top of the Ventilator, with building insulation. Covering the Ballast Box inlet
Ballast Box inlet and outlet ventilation openings will cause the box to overheat which could
and outlet ventilation openings will cause the box to overheat which could result in failure of electrical
result in failure of electrical components. Covering the Ballast Box with insulation will void the
components. Covering the Ballast Box with insulation will damage the Ventilator and void the War-
Ventilator and the Warranty.
ranty.
Rear Mounting Bracket, Bolting
to Wall or Hanging With Rods
Max. Distance
From End of
Ventilator
Section
12"
REAR MOUNTING BRACKET
MIDDLE MOUNTING BRACKET
FRONT MOUNTING BRACKET
INSTALLATION REQUIREMENTS
Installation Requirements - cont.
Table T-A-2-1
Table T-A-2-1
Recommend Minimum Mounting Devices
Middle Mounting Bracket
Max. Spacing
Max. Distance
Between
From End of
Supports
Ventilator
Section
72"
Ventilator Hanging Points
Figure A-2-1
Ventilator Hanging Points
Hanging Rods
Max. Spacing
Between
Supports
36"
72"
Figure A-2-1
A-2
Appendix A, Page A-2
Front Mounting Bracket
Hanging Rods
Max. Distance
Max.
From End of
Spacing
Ventilator
Between
Section
Supports
12"
72"
Advertisement
Table of Contents
