Removing The Heater Assembly & Thermostat - Whirlpool Personal Valet PVBN600 Service Manual

REMOVING THE HEATER ASSEMBLY & THERMOSTAT
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all panels before operating.
Failure to do so can result in death or
electrical shock.
NOTE: Sharp edges may be present.
1. Unplug the clothes vitalizer or disconnect
the power.
2. Remove the twelve T-15 Torx screws from
the top component cover and remove the
cover from the unit (see page 5-2).
3. Disconnect the power connector from the
wiring harness.
4. Remove the mounting screw and lift the
heater assembly out of the unit.
NOTE: The thermostat is part of the heater as-
sembly and must be replaced as an assem-
bly.
Heater Assembly
Power Connector
5-6
Thermostat
Heater
Elements