REMOVING THE CAPACITOR, BUZZER, & THERMISTOR
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all panels before operating.
Failure to do so can result in death or
electrical shock.
NOTE: Sharp edges may be present.
1.
Unplug the clothes vitalizer or disconnect
the power.
2.
Remove the twelve T-15 Torx screws from
the top component cover and remove the
cover from the unit (see page 5-2).
The components described on this page are
shown below.
Capacitor
Thermistor
Buzzer
3.
Disconnect the wires from the terminals of
the component you are servicing.
4.
Remove the mounting screw(s).
Thermistor
5-4
Capacitor
Buzzer