Removal Of Top Deck; If The Top Deck Is To Be Removed For Replacement; If The Top Deck Is To Be Removed To Gain Access To Other Components - Fisher & Paykel smartload DEGX1 Service Manual

6.4

Removal of Top Deck

6.4.1

If the top deck is to be removed for replacement:

(a) Follow instructions for removal of the console. (Refer
to Section 6.2)
(b) Disconnect the wiring harness from the display
module.
(c) Carefully remove the two lid buffers from the front
side top of the deck by levering upwards, taking care
not to damage the top deck.
(d) Remove two screws under the buffers securing the
top deck to the cabinet.
(e) Tilt the top deck upwards towards the rear.
(f) Disconnect the wiring harness from the sensor
module and lift the top deck clear.
(g) Remove the top deck harness from the top deck.
(h) Remove the lid lock, complete with harness, from the
top deck. (Refer to Section 6.5)
(i) Remove the stiffener brackets from under each side
of the top deck.
6.4.2

If the top deck is to be removed to gain access to other components:

(a) Follow instructions for removal of the lid. (Refer to
Section 6.1)
(b) Carefully remove the two lid buffers from front side top
of the deck by levering upwards, taking care not to
damage the top deck.
(c) Remove two screws under the buffers securing the top
deck to the cabinet.
(d) Tilt the top deck upwards towards the rear.
(e) Disconnect the wiring harness from the sensor module
and lift the top deck clear.
Reassembly
(a) Refit in reverse manner ensuring that the user
intervention lever is in its correct position and that the
cabinet top fits between the lugs on the inside front of
the top deck and the inside front edge of the top deck.
- 42 -