Removal Of Top Deck; If The Top Deck Is To Be Removed For Replacement; If The Top Deck Is To Be Removed To Gain Access To Other Components; Removal Of Lid Lock - Fisher & Paykel DEGX1 Service Manual

7.4

Removal of Top Deck

7.4.1

If the top deck is to be removed for replacement:

(a) Follow instructions for removal of the console. (Refer to
Section 7.2)
(b) Disconnect the wiring harness from the display module.
(c) Carefully remove the two lid buffers from the front side top
of the deck by levering upwards, taking care not to
damage the top deck.
(d) Remove two screws under the buffers securing the top
deck to the cabinet.
(e) Tilt the top deck upwards towards the rear.
(f) Disconnect the wiring harness from the sensor module
and lift the top deck clear.
(g) Remove the top deck harness from the top deck.
(h) Remove the lid lock, complete with harness, from the top
deck. (Refer to Section 7.5)
(i) Remove the stiffener brackets from under each side of the
top deck.
7.4.2 If the top deck is to be removed to gain access to other
components:
(a) Follow instructions for removal of the lid. (Refer to Section
7.1)
(b) Carefully remove the two lid buffers from front side top of
the deck by levering upwards, taking care not to damage
the top deck.
(c) Remove two screws under the buffers securing the top
deck to the cabinet.
(d) Tilt the top deck upwards towards the rear.
(e) Disconnect the wiring harness from the sensor module and
lift the top deck clear.
Reassembly
(a) Refit in reverse manner ensuring that the user intervention
lever is in its correct position and that the cabinet top fits
between the lugs on the inside front of the top deck and the
inside front edge of the top deck.
7.5

Removal of Lid Lock

(a) Follow instructions for removal of the top deck. (Refer to
Section 7.4.2)
(b) Remove the screw securing the lid lock to the underside of
the top deck, move the front downwards and slide out.
Reassembly
(a) Refit in reverse manner.
39