Mount The Switch; Rack Or Cabinet Mounting - HP 2510-24 Installation And Getting Started Manual

4. Mount the Switch

After the switch passes self test, you are ready to mount the switch in a stable
location. The Series 2510 Switch can be mounted in these ways:
■
■
■

Rack or Cabinet Mounting

The Series 2510 Switch is designed to be mounted in any EIA-standard 19-inch
telco rack or communication equipment cabinet.
W A R N I N G
For safe operation, please read the mounting precautions on
page
E q u i p m e n t
The 12-24 screws supplied with the switch are the correct threading for
C a b i n e t standard EIA/TIA open 19-inch racks. If you are installing the switch in an
equipment cabinet such as a server cabinet, use the clips and screws that came
N o t e
with the cabinet in place of the 12-24 screws that are supplied with the switch.
Complete step 1, and plan which four holes you will be using in the cabinet
and install all four clips. Then proceed to step 2.
in a rack or cabinet
on the wall
on a horizontal surface
2-4, before mounting a switch.
Installing the Switch
Installation Procedures
2-11