Cisco 6500PD Installation Manual page 25

Chapter 4 Camera Management
Table 4-4
Control
Video Control
Video Codec
drop-down list
Video Resolution
display
Viewer
Video viewer
drop-down list
Image tools
Hotspot Zoom button Click this latch button to enables the digital zoom feature, which provides
Hotspot Pan+Tilt
button
Save Snapshot button Captures and saves a the current video image as a .gif file or a .jpg file in the
Flip button
Mirror button
Camera Video & Control Window Controls
Description
Choose the codec for video transmission (H.264 or MJPEG).
Displays the resolution for video transmission. The resolutions in this depends
on the video standard that you selected.
Choose the viewer to use for video. Options are:
ActiveX—Available only if you are using accessing the IP camera through
•
Microsoft Internet Explorer. Allows you to configure several IP camera
options, such as motion detection and privacy zone.
• QuickTime—Allows viewing of H.264 streams only. Does not allow you
to configure several IP camera options, such as motion detection and
privacy zone.
VLC —Allows viewing of H.264 and MJPEG streams. Does not allow
•
you to configure several IP camera options, such as motion detection and
privacy zone.
The default video viewer value is ActiveX.
five-step digital zooming in for the normal (not full screen) video display.
Click this button again to disable the digital zoom feature.
To perform a digital zoom, engage the Hotspot Zoom button and click the
video display. The first five clicks zoom the display. The sixth click returns to
unzoomed display.
Not supported.
location of your choice and with the file name of your choice.
When you click this button, the Snapshot window appears. Click Save and
follow the on-screen prompts to save the image with the name and in the
location that you want.
Rotates the video image by 180 degrees.
Reverses the video image.
Cisco Video Surveillance 6500PD IP Camera Installation Guide
Viewing Live Video
4-5