Cisco 6500PD Installation Manual page 15

Chapter 2 Camera Installation
Do not disassemble the Network Camera.
•
Do not insert sharp or tiny objects into the
•
Network Camera.
Warning Installation of the equipment must comply with local and national electrical codes. Statement 1074
The power supply must be placed indoors. Statement 331
Warning
Note
This product must be connected to a power-over-ethernet (PoE) IEEE 802.3af compliant power source
Warning
or an IEC60950 compliant limited power source. Statement 353
Caution Inline power circuits provide current through the communication cable. Use the Cisco provided cable or
a minimum 24AWG communication cable.
Note The power adapter that you use with the IP camera must provide power that is within +/–10% of the
required power.
The equipment is to be connected to a Listed class 2, limited power source.
Note
If you use the IP camera outdoors, place the camera and the power supply in a suitable NEMA
enclosure.
Do not drop the Network Camera.
•
Cisco Video Surveillance 6500PD IP Camera Installation Guide
Warnings Before Installation
2-3