Cisco 6500PD Installation Manual page 23

Chapter 4 Camera Management
Table 4-2
Field
General Information
ID
Name
Current Time
S/N
Firmware
Codec
Part Number
Top Assembly Revision Cisco assembly revision number.
Network Status
MAC Address
Configuration Type
LAN IP
Subnet Mask
Gateway Address
Primary DNS
Secondary DNS
IO Port Status
Input Port 1
Output Port 1
Stream 1 and Stream 2
User
IP Address
Start Time
Elapsed Time
Home Window Information
Description
Identifier of the IP camera.
Name of the IP camera.
Current date and time of the IP camera.
Serial number of the IP camera.
Version of the firmware that is installed on the IP camera.
Version of the codec that is running on the IP camera.
Cisco manufacturing part number of the IP camera.
MAC address of the IP camera.
Method by which the IP camera obtains its IP address.
IP address of the LAN to which the IP camera is connected.
Subnet mask of the LAN to which the IP camera is connected.
IP address of the gateway through which the IP camera is connected.
IP address of the primary DNS server, if configured for the IP camera.
IP address of the secondary DNS server, if configured for the IP camera.
Current state of input port 1 on the IP camera.
Current state of output port 1 on the IP camera.
IP camera user name of each user who is accessing the primary video stream
(Stream 1) or the secondary video stream (Stream 2) through a client PC or
a third-party device.
Be default, users appear in order of start time. To displays users in ascending
order of any information in any corresponding column, click the column
heading. Click a column heading again to reverse the display order.
IP address of the client device.
Time and date that the client accessed the video stream for this session.
Length of time that the client has been accessing the video stream.
Cisco Video Surveillance 6500PD IP Camera Installation Guide
Understanding the IP Camera User Interface
4-3