Elation PLATINUM WASH 16R PRO User Manual
  1. Manuals
  2. Brands
  3. Elation Manuals
  4. Light Fixture
  5. PLATINUM WASH 16R PRO
  6. User manual

Elation PLATINUM WASH 16R PRO User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PLATINUM WASH 16R PRO™
user manual 1.0
 
 

Advertisement

Table of Contents
loading

Related Manuals for Elation PLATINUM WASH 16R PRO

Summary of Contents for Elation PLATINUM WASH 16R PRO

  • Page 1 PLATINUM WASH 16R PRO™ user manual 1.0    ...
  • Page 2 Elation Professional USA | 6122 S. Eastern Ave. | Los Angeles, CA. 90040 323-582-3322 | 323-832-9142 fax | www.elationlighting.com | info@elationlighting.com Elation Professional B.V.

  • Page 3: Table Of Contents

    Warranty Safety Instructions General Guidelines Discharge Lamp Warning Fixture Overview Lamp Installation Instructions Fixture Installation Understanding DMX Fixture Menu DMX Channel Functions And Values Error Codes Cleaning and Maintenance Technical Specifications Optional Accessories PLATINUM WASH 16R PRO™ User Manual 1.0...

  • Page 4: General Information

    Congratulations, you have just purchased one of the most innovative and ™ reliable lighting fixtures on the market today! The PLATINUM WASH 16R PRO been designed to perform reliably for years when the guidelines in this booklet are followed. Please read and understand the instructions in this manual carefully and thoroughly before attempting to operate this unit.
  • Page 5 You may also visit us on the web at www.elationlighting.com any comments or suggestions. For service related issue please contact Elation Professional®. ELATION SERVICE USA - Monday - Friday 8:00am to 5:00pm PST...

  • Page 6: Warranty

    No accessories should be shipped with the product. If any accessories are shipped with the product, Elation Professional® shall have no liability what so ever for loss of or damage to any such accessories, nor for the safe return thereof.

  • Page 7: Safety Instructions

    Do not operate this fixture if the power cord has become frayed, crimped and/or damaged. If • the power cord is damaged, replace it immediately with a new one of similar power rating. PLATINUM WASH 16R PRO™ User Manual 1.0...

  • Page 8: General Guidelines

    • Use the original packaging and materials to transport the fixture in for service. DO NOT TOUCH the housing bare-hand during its operation. Turn OFF the power • and allow approximately 15 minutes for the fixture to cool down before replacing or serving. PLATINUM WASH 16R PRO™ User Manual 1.0...

  • Page 9: Discharge Lamp Warning

    R E P L A C E M E N T Please note that due to the nature of the Phillips™ Platinum 16R Lamp and the optical path of the Elation PLATINUM WASH 16R PRO fixture, the lamp MUST BE replaced at 1,500 hours.

  • Page 10: Fixture Overview

    LCD Menu Function Display LEFT Button DOWN Button ENTER Button RIGHT Button MODE/ESC Button UP Button Carrying Handle(s) Lamp Access/Cover Panel 3pin DMX IN 3pin DMX OUT 5pin DMX IN 5pin DMX OUT powerCON IN Fuse PLATINUM WASH 16R PRO™ User Manual 1.0...

  • Page 11: Lamp Installation Instructions

    R E P L A C E M E N T Please note that due to the nature of the Phillips™ Platinum 16R Lamp and the optical path of the Elation PLATINUM WASH 16R PRO fixture, the lamp MUST BE replaced at 1,500 hours.
  • Page 12 LAMP INSTALLATION PROCEDURE 1. Place fixture on a flat surface and remove (3) screws marked “A”, “B”, and “C”, illustrated by the RED ARROWS then remove LAMP COVER PLATE to access the lamp. PLATINUM WASH 16R PRO™ User Manual 1.0...
  • Page 13 . e l a t i o n l i g h t i n g . c o m 2. Gently remove (2) Red Wires connected to spade terminals on base of lamp. PLATINUM WASH 16R PRO™ User Manual 1.0...
  • Page 14 3. Using your index and middle fingers, gently push the top of the lamp DOWNWARD in the direction illustrated by the ARROW, to unlock lamp from the top retention bracket. 4. Gently remove lamp by lifting UP then OUT towards you as illustrated by the ARROWS. PLATINUM WASH 16R PRO™ User Manual 1.0...
  • Page 15 5. Using a clean cloth or gloves, gently install the new lamp into the fixture; placing the bottom edge of the lamp first DOWNWARD into the bottom retention bracket as illustrated by the ARROWS. PLATINUM WASH 16R PRO™ User Manual 1.0...
  • Page 16 ARROW, then push the lamp BACK towards the base of the fixture to LOCK the lamp under the top retention bracket. 7. Gently attached (2) Red Wires connected to spade terminals on base of lamp. PLATINUM WASH 16R PRO™ User Manual 1.0...
  • Page 17 “L-Timer Password”, next press UP or DOWN to toggle down to “Clear Lamp Time”. 4. Press ENTER and select “ON”. The lamp timer has now been reset, press MODE/ESC to exit the menu and return to the home screen. PLATINUM WASH 16R PRO™ User Manual 1.0...
  • Page 18 Please remember the Phillips ™ Platinum 16R Lamp is NOT a hot-restrike lamp therefore, you must wait approximately 15 minutes before you can attempt to restrike the lamp once it has been turned off. PLATINUM WASH 16R PRO™ User Manual 1.0...

  • Page 19: Fixture Installation

    MAXIMUM temperature of external surface 194 F (90 ° ° MINIMUM distance of inflammable materials from surface 1.6 feet (0.5m) Keep fixture at least 1.5 feet (1.5m) away from any flammable materials, decorations, pyrotechnics, etc. PLATINUM WASH 16R PRO™ User Manual 1.0...
  • Page 20 S A F E T Y C A B L E Always use a Safety Cable whenever installing this fixture in a suspended environment to ensure the fixture will not drop if the clamp fails. PLATINUM WASH 16R PRO™ User Manual 1.0...
  • Page 21 SECURING ™ Regardless of the rigging option you choose for your PLATINUM WASH 16R PRO always be sure to secure your fixture with a safety cable. The fixture provides a built-in rigging point for a safety cable on the hanging bracket as illustrated above.

  • Page 22: Understanding Dmx

    1 to that fixture no matter where it is located in the DMX chain. The PLATINUM WASH 16R PRO™ can be controlled via DMX-512 protocol and the DMX address is set via the control menu.
  • Page 23 Connect the provided XLR cable to the female XLR output of your controller and the other side to the male XLR input of the PLATINUM WASH 16R PRO™. The diagram below illustrates a typical DMX-512 connection when the fixture is in the 26 Channel Extended Mode.
  • Page 24 5pin XLR fixtures may be implemented in a 3pin XLR DMX line. When inserting standard 5pin XLR connectors in to a 3pin line a cable adaptor must be used, these adaptors are readily available at most electric stores. The following chart details a proper cable conversion. PLATINUM WASH 16R PRO™ User Manual 1.0...
  • Page 25 That means changing the settings of one channel will only affect the selected fixture. In the case of the PLATINUM WASH 16R PRO™, when in the 26 Channel Extended Mode you should set the starting DMX address of the first unit to 1, the second unit to 27 (26 + 1), the third unit to 53 (27 + 26), and so on.

  • Page 26: Fixture Menu

    F I X T U R E M E N U ON-BOARD SYSTEM MENU The PLATINUM WASH 16R PRO™ comes with an easy to navigate system menu. The next section will detail the functions of each command in the system menu.
  • Page 27 . e l a t i o n l i g h t i n g . c o m PLATINUM WASH 16R PRO™ User Manual 1.0...
  • Page 28 INFORMATION - Time Information - Total Run Time Displays fixture total run time. INFORMATION - Time Information - Last Run Time Displays fixture run time for a given period of time (i.e. rental period). This counter can be reset. PLATINUM WASH 16R PRO™ User Manual 1.0...
  • Page 29 LAMP CONTROL - Lamp ON via DMX When ON, lamp can be powered ON via a DMX controller. LAMP CONTROL - Lamp OFF via DMX When ON, lamp can be powered OFF via a DMX controller. PLATINUM WASH 16R PRO™ User Manual 1.0...
  • Page 30 When ON, the fixture automatically performs PAN / TILT correction in the event either one is disrupted during normal operation. PERSONALITY - Status Settings – Movement Speed Select desired Movement Speed. PERSONALITY - Status Settings – Hibernation Select desired Hibernation time. PLATINUM WASH 16R PRO™ User Manual 1.0...
  • Page 31 RESET FUNCTION - Reset Others Reset ALL other motors not associated previously listed commands to Home Position. EFFECT ADJUST – Test Channel Select and auto test each channel function independently from the DMX controller. PLATINUM WASH 16R PRO™ User Manual 1.0...
  • Page 32 Select one of the (10) user defined internal Auto Programs. EDIT PROGRAM – Edit Program Edit any of the (10) user defined internal Auto Programs. EDIT PROGRAM – Edit Scenes Edit any of the scenes of the internal Auto Programs. PLATINUM WASH 16R PRO™ User Manual 1.0...
  • Page 33 • Press ENTER to confirm. • Select “Auto Program”. • Press ENTER to confirm. • Select “Master” or “Alone”. • Press ENTER to confirm. • Press MODE/ESC in order to return to the main menu. PLATINUM WASH 16R PRO™ User Manual 1.0...
  • Page 34 • Select “Edit Scenes”. • Select desired scene numbers. A maximum of 250 scenes can be programmed. • Press ENTER to confirm. • Press MODE/ESC in order to return to the main menu. PLATINUM WASH 16R PRO™ User Manual 1.0...
  • Page 35 Auto Pro Part 1 is Program 2 Auto Pro Part 2 is Program 3 Auto Pro Part 3 is Program 6 The 3 Slave groups run the Auto Program in certain time segments, as shown in the following picture: PLATINUM WASH 16R PRO™ User Manual 1.0...

  • Page 36: Dmx Channel Functions And Values

    . e l a t i o n l i g h t i n g . c o m D M X C H A N N E L F U N C T I O N S A N D V A L U E S PLATINUM WASH 16R PRO™ User Manual 1.0...
  • Page 37 . e l a t i o n l i g h t i n g . c o m PLATINUM WASH 16R PRO™ User Manual 1.0...
  • Page 38 . e l a t i o n l i g h t i n g . c o m PLATINUM WASH 16R PRO™ User Manual 1.0...
  • Page 39 . e l a t i o n l i g h t i n g . c o m PLATINUM WASH 16R PRO™ User Manual 1.0...

  • Page 40: Error Codes

    (sensor failed or magnet missing) or the stepping-motor is defective (or its driving IC on the main PCB). The TILT- movement is not located in the default position after the reset. PLATINUM WASH 16R PRO™ User Manual 1.0...
  • Page 41 (sensor failed or magnet missing) or the stepping-motor is defective (or its driving IC on the main PCB). The PrismR is not located in the default position after the reset. PLATINUM WASH 16R PRO™ User Manual 1.0...

  • Page 42: Cleaning And Maintenance

    Regular inspections are recommended to insure proper function and extended life. There are no user serviceable parts inside this fixture, please refer all other service issues to an authorized Elation service technician. Should you need any spare parts, please order genuine parts from your local Elation dealer.

  • Page 43: Technical Specifications

    (2) Omega Brackets, (1) 3pin DMX, (1) Safety Cable, and (1) powerCON Cable Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice. PLATINUM WASH 16R PRO™ User Manual 1.0...

  • Page 44: Photometric Data

    . e l a t i o n l i g h t i n g . c o m COLORS PHOTOMETRIC DATA Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice. PLATINUM WASH 16R PRO™ User Manual 1.0...

  • Page 45: Dimensional Drawings

    . e l a t i o n l i g h t i n g . c o m DIMENSIONAL DRAWINGS CIRCUIT SCHEMATICS pending Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice. PLATINUM WASH 16R PRO™ User Manual 1.0...

  • Page 46: Optional Accessories

    15 ft. (4.5m) 3pin PRO DMX Cable AC5PDMX5PRO 5 ft. (1.5m) 5pin PRO DMX Cable AC5PDMX10PRO 10 ft. (3m) 5pin PRO DMX Cable AC5PDMX15PRO 15 ft. (4.5m) 5pin PRO DMX Cable Additional Cable Lengths Available PLATINUM WASH 16R PRO™ User Manual 1.0...

Table of Contents