W-101 Bubble Machine User Manual Please read and save these instructions. Antari Lighting and Effects Ltd.
Page 3
ANTARI W-Series bubble MACHINE. Introduction Thank you for choosing an ANTARI W-Series Bubble Machine. You now own a rugged and powerful state-of-the-art bubble machine. Prior to use, we suggest that you carefully read all of the instructions. By following the suggestions found in this user manual, you can look forward to the reliable and satisfactory performance of your ANTARI Bubble Machine for years to come.
Pour bubble liquid into the liquid tank, being careful not to exceed the maximum fluid level. DO NOT OVERFILL. It is recommended to use Antari BL- Bubble liquid for best performance. When the container is 3/4 full, lower the housing and tighten the screws.
W-101 Hanging Bracket: Your model includes a mounting bracket designed for overhead installation; it may be installed at floor level or suspended overhead. If the unit is to be mounted using the bracket, it is important that the fog does not shoot directly at any one's face. Whatever installation method you choose, do not allow the unit to have more than a 25 degree angle of inclination.
OPERATION Turn on the power switch located on the back of the W-101 bubble machine. You will notice that the internal bubble drum and fan are activated. Bubbles are...
Page 7
- All transmitters are compatible to any receiver * Receiver: - The receiver is pre-equipped firmly and tested to each of the W-101 (rear panel), please do not try to remove it. * Functions and Setting: 1.
Page 8
shipment) to control machine, the setting must be completed within 15 seconds after switching on the machine otherwise it will leave “transmitter setting mode” automatically. Setting Example : There is a LED light on the rear control panel of the machine. When the machine is turned on, the LED green light will flash for 15 seconds.
Warranty Warranty shall be valid only if the product is purchased from Antari's authorized distributors or dealers. For warranty service, send the product only to an authorized distributor or dealer. All warranties are void if the product has been modified in any manner; if the product has been repaired or serviced by unauthorized personnel;...
Page 12
For current product information visit Antari at : www.antari.com www.antari.com.tw For information requests please contact us at : sales@antari.com C08W10100...
Need help?
Do you have a question about the W-101 and is the answer not in the manual?
Questions and answers