Antari SW-250 User Manual

Antari SW-250 User Manual

Wireless control high output snow machine
Hide thumbs Also See for SW-250:

Advertisement

SW-250 Wireless Control
High Output Snow Machine
User Manual
English
Français
Deutsch
中文
© 2014 Antari Lighting and Effects Ltd.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SW-250 and is the answer not in the manual?

Questions and answers

Summary of Contents for Antari SW-250

  • Page 1 SW-250 Wireless Control High Output Snow Machine User Manual English Français Deutsch • • • 中文 © 2014 Antari Lighting and Effects Ltd.
  • Page 3: Danger Of Electric Shock

    ANTARI SW-250 SNOW MACHINE INTRODUCTION Thank you for choosing Antari SW-250 Snow Machine. Prior to use, it is suggested to read the instructions carefully and thoroughly. By following the instructions listed in this user manual, you can look forward to the best haze effect and the most reliable performance of your Antari SW-250Snow Machine for years to come.
  • Page 4 Assemble 4 w ashers on both inner sides of the hanging bracket w ith M8 screw s on outer sides as indicated. Fill with ANTARI SL-5(A) snow fluid. Any other types of fluid can damage the unit. When filled, place cap...
  • Page 5: Transmitter Registration

    The LCD screen will finally show “Wireless Setup.OK” once the 15 seconds ends. Up to 5 transmitters are allowed to be registered with one SW-250. The included transmitter has been registered with the machine before shipment and can be directly operated without any start-up setting. Therefore, the registration is only needed before use of new W-1.
  • Page 6 Duration Set To set the duration time under timer mode by pressing Up/Timer and Down/Volume buttons (10 to 200 seconds). Timer Out To set the output volume under timer mode by pressing Up/Timer and Down/Volume buttons (1 to 100 %). Volume Out To set the output volume under continuous mode by pressing Up/Timer and...
  • Page 7: Remote Control Operation

    With the transmitter it is possible to output via radio over a distance of up to 50 meters. The transmitter is compatible to any receiver of SW-250 and can control an unlimited number of machines in parallel. Press the button “A”, to ouput. As control, the LED on the transmitter is lit. To stop the output, press the button “B”.
  • Page 8 The receiver is tested and built in SW-250. Please do not try to remove it. The receiver responds to up to 5 different transmitters that are registered with the machine. The included transmitter has been registered with the machine before shipment. It can be directly operated without any start-up setting.
  • Page 9: Maintenance

    DMX CONTROL OPERATION SW-250 has on-board DMX control and the addressing is via LCD control panel. SW-250 uses 1 channel to control output on/off and volume. The channel has a value range from 0 to 255. The on/off function can also be programmed with a DMX controller or DMX control software used by lighting and effects operator.
  • Page 10: Snow Fluid

    If the machine is still not functional, discontinue operating otherwise it may result in permanent damage to the unit. Return the machine to your Antari dealer. SNOW FLUID Antari SL-5/SL-5(A) fluid was designed for the use with Antari snow machines. Antari SL-5(A) is a non-toxic solution that produces fast-dissipating snow. TECHNICAL SPECIFICATIONS...
  • Page 11 _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________...
  • Page 12 _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________ _________________________________________________________...
  • Page 13 C08SW2504...

Table of Contents