Digitizer Options Tab; Input Mode - Dell Latitude XT3 Owner's Manual
Hide thumbs
Also See for Latitude XT3:
- Owner's manual (141 pages) ,
- Manual (108 pages) ,
- Setup manual (32 pages)
Table of Contents
Advertisement
•
Pen
•
Interactive Options
Digitizer Options Tab
The Digitizer Options tab is used for the following
•
Input mode selection
•
Touch tuning
Figure 8. N-trig DuoSense Digitizer Settings — Digitizer options
Input Mode
The N-trig DuoSense Digitizer applet has four operating modes:
•
Pen only— In this mode, the stylus is the only device that can be used as the input
device with the N-trig digitizer. To change from Pen only mode to any other mode:
a.
Click or tap on the N-trig applet icon in the system tray.
b.
On the applet window, select the desired mode and click OK
•
Touch only — In Touch only mode, a single finger is the only input device that can be
used with the N-trig digitizer. Using the stylus is not possible.
25
- Quick Links:
- Using Pen as a Pen
Hide quick links:
Advertisement
Table of Contents
