Dell Latitude XT3 Owner's Manual page 144

Power Management
Wireless Radio Control
Wake on LAN/WLAN
ExpressCharge
Charger Behavior
POST Behavior
Adapter Warnings
Mouse/Touchpad
144
NOTE: This feature is only functional when the AC
power adapter is connected. If the AC power adapter is
removed during Standby, the system setup will remove
power from all of the USB ports to conserve battery
power.
Allows you to enable or disable the feature that
automatically switches from wired or wireless networks
without depending on the physical connection.
Default Setting: Disabled
Allows you to enable or disable the feature that powers on
the computer from the Off state when triggered by a LAN
signal.
Default Setting: Disabled
Allows you to enable or disable the ExpressCharge feature.
The options are:
• Standard (Default Setting)
• ExpressCharge
Allows you to enable or disable the battery charger. The
options are;
• Disabled
• Enabled (Default Setting)
Allows you to enable or disable the system setup (BIOS)
warning messages when you use certain power adapters.
Default Setting: Enable Adapter Warnings
Allows you to define how the system handles mouse and
touch pad input. The options are:
• Serial Mouse
• PS2 Mouse
• Touchpad/PS-2 Mouse
Default Setting: Touchpad/Mouse 2