Table of Contents
Advertisement
GS-SR222 System Installation Guide
Figure 20
Step 7. Put the PCI raiser bracket into the server system. (Fig-20)
Step 8. Securing the bracket with tighten the raiser card firming
screw. (Fig-21)
5.6. Air Flow Duct Installation
GS-SR222 is enhanced a new device which called Airflow Duct.
The main function of the airflow duct is to increase the capability
of driving out the excessive system heat (Especially the CPU
heat). In order to maintain the system operating smoothly, please
note that the CPU and Memory are installed in advance.
Remember to install the airflow duct back to into the system to
ensure the consistency of system operation.
To install the airflow duct properly, please take the following steps:
Step 1. There are two holes on locate on the system module.
(Fig-22) There are two stable racks on the airflow duct.
18
Figure 21
Advertisement
Table of Contents
