Table of Contents
Advertisement
GS-SR222 System Installation Guide
5.12. Dual LAN Card Installation (Optional)
GS-SR222 provides optional 64bit/66 MHz dual LAN card. To
install dual LAN card please follow these few steps.
Step 1. There are three screws holding the riser bracket. First,
remove the screw on the top of the bracket (Fig-33) then remove
the two screws located at the rear. (Fig-34)
Figure 33
Step 2. Then, unscrew the raiser card firming screw as the stable
clip circle pointed. (Fig-35)
Figure 35
Step 3. Carefully pull up and remove the PCI riser bracket. (Fig-
36)
28
Figure 34
Figure 36
Advertisement
Table of Contents
