Table of Contents
Advertisement
3-2
Removing and Installing the Air Duct
Before you remove the top rear cover:
• Make sure the system is not turned on or connected to AC power.
• The section applies to G482-Z50 only.
Follow these instructions to remove and install the air duct:
1.
Lift up to remove the air duct.
2.
To install the air duct, align the rear edge of air duct with the GPU module brackets ensuring that
the arrows on the air duct face the rear of the system as shown in the image below, and then push
down the air duct into chassis until it firmly seats.
- 27 -
System Hardware Installation
Advertisement
Table of Contents
