Table of Contents
Advertisement
System Installation Guide
Fig-14
Fig-15
3.6.
Air Flow Duct Installation Guide
GS-SR102 and GS-SR202 have installed a new device called
Air Flow Duct. The main function of Air flow duct is its
capability of driving out excessive system heat(Especially the
CPU Heat). In order to maintain the smooth system operation,
please note that after CPU and RAM have being installed.
Remember to apply the air flow duct back onto the system to
ensure consistent system operation. We will differentiate those
two air flow duct installation guide on the following steps:
(1.) SR-102：
Please insert the Air Flow Duct following the arrow(Fig-16)。
After smoothly insert the Air Flow Duct, please pay attention to
the stable clip circle on Fig-17. Stable Circle must complete
insert in the Air Flow Stable Rack.
Fig-18 indicates Air Flow Duct should be flat and completely insert
into the system. When the upper case is placed, please be aware that
Power Supply header and motherboard should be completely insert
under the duct cover. Otherwise the upper case might not able to
close tightly.
3-7
Advertisement
Table of Contents
