Table of Contents
Advertisement
GS-SR113 System Installation Guide
5.6. Air Flow Duct Installation
GS-SR113 is enhanced a new device which called Airflow Duct.
The main function of the airflow duct is to increase the capability
of driving out the excessive system heat (Especially the CPU
heat). In order to maintain the system operating smoothly, please
note that the CPU and Memory are installed in advance.
Remember to install the airflow duct back to into the system to
ensure the consistency of system operation.
To install the airflow duct properly, please take the following steps:
Step 1. Insert the airflow duct follow the arrow direction. (Fig-17)
Figure 17
Figure 18
Step 2. After inserting the airflow duct, please pay attention to the
stable clip circle shown in Figure 18. Make sure the airflow duct is
firmly inserted in the airflow stable rack.
18
Advertisement
Table of Contents
