Table of Contents
Advertisement
GS-SR125E System Installation Guide
Step 3. First, hook one end of the cooler bracket to the CPU
socket as shown in the Fig-8. Make sure the middle part of
bracket is push into the desired position. (Fig-8)
Step 5. Hook the other end of the cooler bracket by gripping it to
another side of retention module. (Fig-9)
Figure 9
5.5.
Memory Installation
The motherboard contains six DIMM (Dual Inline Memory Module)
sockets. The systems BIOS will auto detect the size if the memory
after installing. To install memory, simply push the memory
modules into the DIMM sockets. (Fig -10 & 11)
Figure 10
Figure 11
14
Advertisement
Table of Contents
