3.
To remove the transmission:
a) Remove the agitator (see step 2).
b) Slide the agitator clip and washer up
and off the transmission shaft.
Agitator Clip
c) Remove the pump and motor (see page
4-11 for the procedure).
Agitator Washer
4-4
d) Squeeze the locking tabs together and
push the wire standoff out of the trans-
mission mounting hole.
e) Remove the three 1/2˝ bolts from the
transmission.
Transmission Bolts
f) Pull the transmission away from the
washer and remove transmission.
g) Remove the isolator from the motor
coupler.
Isolator
Wire
Standoff
Remove
Transmission