Removing The Terminal Pcb - Wyse WY-60 Maintenance Manual

11. Loosen the three screws that hold the ESD shield in place.
12. Remove the ESD shield.
1 3 . Lo
0
sen the rem a i n in g t h r e e No. 2 Phi 11 ips s c r e wson the
underside of the terminal PCB.
14. Lift the terminal PCB up and out.
Figure 2-7 Removing the Terminal PCB
Back Bezel
Barrier Plate
Restraining Tab
Filament Harness Plastic Studs
Grounding Wires /
~ &J/
4
2-12