Toshiba Carrier RAV-SP180AT2-UL Service Manual page 84

No. Part name
1. Detachment
Front cabinet
2. Attachment
Side cabinet 1) Perform works of Detachment 1 of
(Right)
2) Take off screw of the side cabinet (Right) and the
3) Take off fixed screws between the main unit and the
4) Take off screws of the side cabinet (Right) and the
5) Take off screw of the side cabinet (Right) and the
Procedure
1) Perform work of Detachment 1 of
2) Remove screws (M4, 8 mm, 2 pcs.) of the front
cabinet and the inverter cover.
3) Take off screws of the front cabinet and the
bottom plate. (M4, 8 mm, 3 pcs.)
4) Take off screws of the front cabinet and the motor
support. (M4, 8 mm, 2 pcs.)
5) Take off screws of the front cabinet and side
cabinet (Right). (M4, 8 mm, 1 pc.)
• The left side of the front side if made to insert to
the rear cabinet, so remove it pulling upward.
1) Insert hook at the left side of the front side into
the rear cabinet.
2) Hook the lower part at the right side of the front to
concavity of the bottom plate. Insert the hook of
the rear cabinet into the slit of the front cabinet.
3) Attach the removed screws to the original positions.
heat exchanger. (M4, 8 mm, 1 pc.)
inverter box. (Wiring port side) (M4, 8 mm, 2 pcs.)
bottom plate. (M4, 8 mm, 2 pcs.)
valve fixed plate. (M4, 8 mm, 1 pc.)
.
and .
– 84 –
Remarks
Motor support Motor support Motor support
Inverter cover Inverter cover Inverter cover
Front Front Front
cabinet cabinet cabinet
Side cabinet Side cabinet Side cabinet
(Right side) (Right side) (Right side)
Screw Screw Screw
Claw Claw Claw
Slit Slit Slit
Front cabinet Front cabinet Front cabinet
Slit Slit Slit
Heat exchanger Heat exchanger Heat exchanger
Screw Screw Screw
Inverter box Inverter box Inverter box
Side cabinet Side cabinet Side cabinet
(Right side) (Right side) (Right side)
Valve fixed plate Valve fixed plate Valve fixed plate
Side cabinet Side cabinet Side cabinet
(Right side) (Right side) (Right side)