Detachments; Outdoor Unit - Toshiba Carrier RAV-SP180AT2-UL Service Manual

Ac split type outdoor unit super digital inverter
Hide thumbs Also See for Carrier RAV-SP180AT2-UL:
Table of Contents

Advertisement

11-1. Outdoor Unit

11-1-1. RAV-SP180AT2-UL
No.
Part name
Common
procedure
Never forget to put on the gloves at working
time, otherwise an injury will be caused by the
parts, etc.
1. Detachment
1) Stop operation of the air conditioner, and turn
2) Remove the valve cover. (M4, 8 mm, 3 pcs.)
3) Remove connecting cable.
4) Remove the conduit mounting plate by taking
5) Remove the upper cabinet.
6) Remove the waterproof cover.
2. Attachment
1) Attach the waterproof cover.
Be sure to attach a waterproof cover.
If it is not attached, there is a possibility that
water enters inside of the outdoor unit.
2) Attach the upper cabinet. (M4, 8 mm, 5 pcs.)
3) Attach the conduit mounting plate.
4) Perform cabling of connecting cables.
5) Attach the valve cover. (M4, 8 mm, 3 pcs.)

11. DETACHMENTS

Procedure
CAUTION
off the main switch of the breaker for air
conditioner.
• After removing screw, remove the valve
cover pulling it downward.
off 2 screws. (M4, 8 mm, 2 pcs.)
(M4, 8 mm, 5 pcs.)
• After taking off screws, remove the upper
cabinet pulling it upward.
CAUTION
(M4, 8 mm, 2 pcs.)
• Insert the upper part of the upper cabinet,
set hooking claw of the valve cover to the
slit (at three positions) of the main body,
and then attach it pushing upward.
– 83 –
Remarks
Valve cover
Valve cover
Valve cover
Connecting cover
Connecting cover
Connecting cover
Conduit mounting plate
Conduit mounting plate
Conduit mounting plate
Upper cabinet
Upper cabinet
Upper cabinet
Waterproof cover
Waterproof cover
Waterproof cover

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents