Toshiba Carrier RAV-SP180AT2-UL Service Manual page 106

No. Part name
1. Detachment
PMV coil
1) Perform work of Detachment 1 of
2) Take off screws that fix the wiring division panel and
3) Turn the coil while pulling upward and then remove
2. Attachment
1) Surely match the positioning projection of the coil with
1. Detachment
Fan guard
1) Perform work of Detachment 1 of
To prevent scratch on the product, carry out the work
on cardboard, cloth, etc.
2) Remove the discharge port cabinet and then put on
3) Remove the guard stopper. (8 positions × 2)
2. Attachment
1) Insert the guard stopper to fix the fan guard.
Check that all the guard stopper are fixed at the
specified positions.
Procedure
the side cabinet. (M4, 8 mm, 2 pcs.)
the coil from the PMV main unit.
the concave part of PMV main unit and then fix it.
XREQUIREMENTX
it so that the fan guard side directs downward.
(8 positions × 2)
XREQUIREMENTX
and .
and .
– 106 –
Remarks
Discharge port cabinet
Fixing screws Fixing screws Fixing screws
of wiring division of wiring division of wiring division
panel panel panel
Wiring division panel Wiring division panel Wiring division panel
Concave part Concave part Concave part PMV main unit PMV main unit PMV main unit
Positioning projection Positioning projection Positioning projection PMV coil PMV coil PMV coil
Discharge Discharge Discharge
port cabinet port cabinet port cabinet
Fan guard Fan guard Fan guard
Bell mouth
Fan guard Fan guard Fan guard
stopper stopper stopper
Hooking claw Hooking claw Hooking claw