Download Print this page

After Washing - Haier HWM70-12688NZP User Manual

Automatic washing machine

Advertisement

1

After washing

Please first pull off the power plug from the receptacle before cleaning.
After using, please clean the lint and foreign materials of the lint filter and
overflow filter in time. Otherwise it may influence your using the machine.
The lint filter must be used during washing.
It must be cleaned in time after each using.
The filter screen of the water inlet valve is likely
to be blocked by foreign materials and influence
the water inlet.
Please clean it with brush every two months.
1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose.)
2.Do not store water in the washing machine for a long period. Drain the water completely
after each using.
3.Be sure to pull off the power plug before maintenance.
4.Hang up the power cord and drain hose.
5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid
for some time (about 1 hour), then close the top lid.
(If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns
sometimes. Please confirm again before sending it to repair.
If there are real breakdowns, please come to the special maintenance department or after-sale
service department of our company. Do not repair it by yourself.
Phenomena
The reason
The digitron displays E2.
The top lid is not closed.
The methods of dismantle and install lint filter as follows:
1.Push down the spring piece of the top lint filter to
make the claws out of the filter cover,and then pull out
the lint filter to get it down.(figure 1)
2.Pull the back cover of the lint filter, and then you can
get down it off the front cover (figure 2)of the lint the lint
filter.
3.Sweep the rubbish in the lint filter.
4.Put the back cover of the lint filter into the front cover.
(figure 2)
5.Put the lint filter into filter cover, and make it tight.
6.Make sure the lint filter well installed,or it can influence
your use.
If the cabinet is dirty, wipe it with wet cloth
Do not flush it directly with water.
Wipe it with neutral detergent.
Do not wipe it with thinner, petrol, alcohol etc
How to settle
Close the top lid or close the top lid
and press the START/PAUSE button
14

Advertisement

loading

This manual is also suitable for:

Hwm60-12699nzp