Table of Contents
Advertisement
Using the extractor as a
recirculation device
Refit the top cover and grill as below before proceeding to
fit the charcoal filter – Locate each filter onto the motor
housing spigot and rotate to lock into position as shown in
figure 20.
Using the extractor as an
extraction device
Feed the duct pipe through the top cover and fix it to the
duct adapter ring. Connect the ring to the extractor and
refit the top cover panel. Note that charcoal filters are not
required when the unit is to be operating in this manner.
Fig. 20
Fig. 21
10
Advertisement
Table of Contents
