Non-Contact Ac Voltage Detector - Craftsman 82315 Owner's Manual

NON-CONTACT AC VOLTAGE DETECTOR

The EX330 can detect the presence of AC voltage (from 100 to
600VAC) simply by being held very near to a voltage source.
WARNING: Test the AC voltage detector on a known live circuit
before each use.
WARNING: Before using the meter in the AC Voltage Detector
mode, verify that the battery is fresh by confirming characters
appear on the LCD when the function dial is turned to any
position. Do not attempt to use the meter as an AC Voltage
Detector if the battery is weak or bad.
NON-CONTACT VOLTAGE (NCV)
The NCV function works on any
rotary switch position.
1. Test the detector on a
known live circuit before
use.
2. Press and hold the NCV
button for the duration of
the test. The meter will
beep once when the
button is pushed.
3. Hold the top of the meter
very close to the voltage
source as shown.
4. If voltage is present, the
rim of the LCD display will
flash a bright orange and
an audible warning will sound.
15