Billion BiPAC 7800NXL Setup Manual page 7

4. Please wait while the device is being configured
5. Once the settings have been successfully configured, you will now receive a
message to configure your wireless connection
6. To configure the wireless connection, ensure the following settings are
entered:

Wireless check box is ticked to Enable

SSID is named (this will be any name you wish to give to your Wireless
Network. By default this is set to wlan-ap)

WPA2 Pre Shared Key: This will ensure that in order to connect to your
wireless network a password will be required. Please enter a password
between 8 - 63 characters; this can contain letters and numbers
7. You will now receive a message that process is finished. On the bottom of the
page you will see an option to Restart the modem, please click on restart