Calibrating The Parrot Bebop Drone; Map Mode - Parrot Bebop User Manual

Calibrating the Parrot Bebop Drone

When you use the Parrot Bebop Drone for the first time, the calibration screen appears.
1. Follow the procedures on the screen.
2. Once you completed the three steps, press
Note: You can also calibrate your Parrot Bebop Drone if it does not stay on course
correctly. To do so, press >Flight settings.

Map mode

You can display a map instead of the camera video feedback to see the position of your
Parrot Bebop Drone.
Before activating the map mode:
preload a map. If you fly the Parrot Bebop Drone in an area without internet
connection, or if the internet connection is lost while flying, the Parrot Bebop Drone
will still be located on the map.
wait until the
is detected.
Preloading a map
1. Go to the main screen of FreeFlight 3.
2. Press > Settings.
3. Press Preload a
> The map appears. The blue dot indicates your position.
Note: To locate your position on the map, the FreeFlight 3 application must have
access to your smartphone location services. For iOS devices, activate the function in
Settings > FreeFlight 3 > Location service. For Android devices, activate the function in
Settings > Application manager > FreeFlight 3 > Permissions. For further information,
see your smartphone user guide.
4. Zoom in your flight area. If you already are in your flight area, press
location, then zoom.
icon turns green to indicate the Parrot Bebop Drone GPS position
map.
.
Center on your
Flying
11