Calibrating The Bebop 2; Map Mode - Parrot bebop 2 User Manual

Calibrating the Bebop 2

When you use the Bebop 2 for the first time, the calibration screen appears.
1. Follow the procedures on the screen.
2. Once you completed the three steps, press
Note: You can also calibrate your Bebop 2 if it does not stay on course correctly. To do so,
go to >Flight settings.

Map mode

You can display a map instead of the camera video feedback to see the position of your
Bebop 2.
Before activating the map mode:
·
preload a map. If you fly the Bebop 2 in an area without internet connection, or if the
internet connection is lost while flying, the Bebop 2 will still be located on the map.
·
wait until the
Preloading a map
1. Go to the main screen of FreeFlight 3.
2. Go to
3. Press
> The map appears. The blue dot indicates your position.
Note: To locate your position on the map, the FreeFlight 3 application must have access to
your smartphone location services. For iOS devices, activate the f unction in Settings >
FreeFlight 3 > Location service. For Android devices, activate the f unction in Settings >
Application manager > FreeFlight 3 > Permissions. For f urther inf ormation, see your
smartphone user guide.
4. Zoom in your flight area. If you already are in your flight area, press
location, then zoom.
12 Flying
icon turns green to indicate the Bebop 2 GPS position is detected.
> Settings.
Preload a map.
.
Center on your