Calibrating The Parrot Bebop 2; Flat Trim; Gps Signal - Parrot BEBOP 2 User Manual

4
5
6
7
8

Calibrating the Parrot Bebop 2

When you use the Parrot Bebop 2 for the first time, the calibration screen appears.
1. Follow the procedures on the screen.
2. Once you completed the three steps, press
Note:
You can also calibrate your Parrot Bebop 2 if it is unstable in flight. To do so, go
to >Position, distance and limits.

Flat trim

The flat trim setting is a means to reset the sensors to a hori
your drone is unstable in flight or following a crash.
To flat trim:
1. Place the Parrot Bebop 2 on a flat, dry, unobstructed surface.
2. In the FreeFlight Pro application, go to
3. Press

GPS signal

Note:
If you are in an area with no GPS reception, the Parrot Bebop 2 position will not be
detected.
The icon indicates that the Parrot Bebop 2 position is not detected.
12 Flying
settings. When you record a
video in 1080p, the live return
video feed is 480p. When you
record a video in 720p, the live
return video feed is 720p
Video recording
Video recording time
Return home
Pre-programmed acrobatics
Take a photo
Flat Trim.
12 Distance from your smartphone
13 Take off/Landing
14 Wi-Fi signal
15 Battery level of the Parrot Bebop
2
6
1 FPV mode
.
z
ontal plane. This is used if
> Position, distance and limits.