Flying; Calibrating The Parrot Bebop Drone; Switching To Map Mode; Take Off - Parrot Bebop User Manual

Flying

Note : Normal piloting mode is activated by default. To change mode, see
Settings>Piloting.
1. Launch the FreeFlight 3 application.
2. Press Start to pilot the Parrot Bebop Drone.
>Your smartphone screen locks in landscape format.
Press to return to the main menu.

Calibrating the Parrot Bebop Drone

When you use the Parrot Bebop Drone for the first time, the calibration screen appears.
1. Follow the procedures on the screen.
2. Once you completed the three steps, press
Note: You can also calibrate your Parrot Bebop Drone if it does not stay on course
correctly. To do so, press >Flight settings.

Switching to map mode

You can display a map instead of the camera video feedback to see the position of your
Parrot Bebop Drone. To do so, press
Note: To locate your Parrot Bebop Drone with precision on the map, the FreeFlight 3
application must have access to your smartphone location services. For iOS devices,
activate the function in Settings > FreeFlight 3 > Location service. For Android devices,
activate the function in Settings > Application manager > FreeFlight 3 > Permissions.
For further information, see your smartphone user guide.

Take off

1. Place the Parrot Bebop Drone on a flat and dry surface and in a unobstructed and
lit area.
2. Press Take Off.
> The Parrot Bebop Drone takes off and hovers at approximately 1 m above the
ground.
.
.
Flying 9