Landing; Return To Starting Point - Parrot Bebop User Manual

2. Switch the Parrot Bebop Drone on.
> Your computer detects the Parrot Bebop Drone automatically. Wait until the
driver installation is complete. A pop-up appears like the one shown below.
The appearance, content and location of this message will depend on your
operating system.
3. Open the file, as though it were a USB flash drive.
> You can copy the photos and/or videos on your computer.
Note : It is not possible to transfer video files to the Parrot Bebop Drone.

Landing

Ensure that the Parrot Bebop Drone is over a flat, dry and unobstructed surface, then
press Landing to make the Parrot Bebop Drone land.
Press Emergency in an emergency case only. The motors will cut out and the Parrot
Bebop Drone will immediately drop from the height at which it is flying. Using the
landing button is sufficient in most instances.

Return to starting point

Note: If neither your smartphone nor the Parrot Bebop Drone receives a GPS signal,
the Return to starting point feature cannot be activated.
The Return to starting point
back to:
the last take off location,
your smartphone location if the Parrot Bebop Drone has received no GPS signal.
Note: To locate your position on the map, the FreeFlight 3 application must have
access to your smartphone location services. For iOS devices, activate the function in
feature enables you to make the Parrot Bebop Drone fly
Flying
17