Table of Contents
Advertisement
SpeechMike Pro Barcode Reader Installation and User Manual
6
Barcode Reader
The SpeechMike Pro Barcode Reader has a built-in barcode reader that can be
programmed to suit the application you are using. The reader is connected to the PC via
the keyboard interface, and no additional software is required. The barcode reader
supports the following standards: EAN, UPC, Code 128, Code 39, Code 93, 2 out of 5
family, Codabar, Code 11, MSI Code and Interleaved 2/5.
Configuring the barcode reader
Before using the barcode reader for the first time, it is necessary to adapt it to your local
keyboard language. This must normally be carried out once only. The default keyboard
language is US English. To change the keyboard language or to change the beep tone,
prefix and suffix, please refer to the Decoder&Scanner Programming Manual that is
provided with this package.
DISCLAIMER
Philips is not liable for problems that may occur if the SpeechMike Pro LFH 6184 is not
used as described in the Decoder&Scanner Programming Manual and the user
documentation delivered with the device.
Should you encounter technical problems, please contact your vendor or Philips
Technical Support.
Advertisement
Table of Contents
