Table of Contents
Advertisement
SmartNode 4960 Getting Started Guide
G.SHDSL Daughter Card (if applicable)
Note
For information on configuring the G.SHDSL daughter card,
see Chapter 5,
Factor
DSL
DSL Connection
Management
ATM Support
Interworking/Interoperability • G.SHDSL Interoperability:
G.SHDSL Daughter Card (if applicable)
"G.SHDSL Basic Configuration"
Table 15. G.SHDSL Daughter Card Specifications
• ITU-T G.991.2 (and Amendment 2)
• ITU-T G.991.2, Annex A, B, F, G
• Upgradable to ITU-T G.shdsl.bis—Annex F and G
• G.991.2 2/4 (1/2 pair) operation
• G.994.1 (G.hs) (per G.991.2)
• ITU-T G.991.2 Section E.9
(TPS-TC for ATM transport)
• ITU-T G.991.2 Section E.11
(TPS-TC for PTM transport)
RJ-11/12 (2-wire)
• I.610 OAM F4/F5
• Management interfaces: GUI and Telnet
• Software upgrade: GUI and TFTP
• Classical IPoA (RFC 1577/2225)
• PPPoE Client (over ATM) (RFC 2516)
• IPoA (RFC 2684/1483)
• ATM AAL5 encapsulation
• Max. 8 PVCs
• User selectable VC MUX and LLC MUX (default)
• Configurable auto-connection
• ATM QoS: UBR (default), CBR, and VBR-rt, VBR-nrt,
UBR: per VC queuing
• Auto-configuration: TR-037 & ILMI 4.0
Alcatel
-
NEC
-
Lucent Anymedia
-
Lucent Stinger
-
• BRAS Interoperability:
Cisco
-
Redback
-
on page 41.
Specs
B • Specifications
57
Advertisement
Table of Contents
