Configure Wpa, Wpa2, And Wpa/Wpa2 (Radius) - D-Link DIR-280 User Manual

Secton 4 - Securty

Configure WPA, WPA2, and WPA/WPA2 (RADIUS)

It s recommended to enable encrypton on your wreless router before your wreless network adapters. Please establsh
wreless connectvty before enablng encrypton. Your wreless sgnal may degrade when enablng encrypton due to the added
overhead.
1. Log into the web-based configuration by opening a web browser and entering the IP address of the router (192.168.0.1). Click
on Wireless Settings on the left sde.
2. Next to Security Mode, select Enable WPA Only Wireless Security (enhanced), Enable WPA2 Only Wireless Security (enhanced),
or Enable WPA/WPA2 Wireless Security (enhanced).
3. Next to Cipher Type, select TKIP, AES, or Auto.
4. Next to PSK/EAP, select EAP.
5. Next to RADIUS Server 1 enter the IP Address of your
RADIUS server.
6. Next to Port, enter the port you are using with your
RADIUS server. 1812 s the default port.
7. Next to Shared Secret, enter the security key.
8. If you have a secondary RADIUS server, enter its IP
address, port, and secret key.
9. Clck Save Settings to save your settngs.
D-Lnk DIR-280 User Manual 50